Skip to main content

Setting up Jongo using an iOS device - Knowledgebase / Internet radios / Apple/Android Pure Connect - PURE SUPPORT

Setting up Jongo using an iOS device

Authors list

You can connect Jongo to your Wi-Fi network by following the below steps
•    Make sure Jongo is in range of your Wi-Fi network.
•    Briefly press Jongo's Wi-Fi button. Jongo's power LED will start flashing green.
•    From your iOS device, open Settings>Wi-Fi and connect to Jongo’s wireless network when it appears in the list.
•    Open your browser at to start Jongo Setup Manager.
•    Carefully enter your Wi-Fi network details and Save.
Note: If for example your SSID is hidden or you require a static IP address for your Jongo please select Advanced where you can specify this